Chain electric hoist for you: electric hoist operator should comply with the guidelines
First of all, the whole check cleared and electric hoist is correct, the next step is to process the actual operation of the hoist, which not only has strict requirements on the quality of the operation of hoist hoist itself, the staff should also be trained in the operation, strict control, this part should be no danger of anything going wrong. So what are the rules that the operator needs to remember?
1, before and after each operation should be carried out daily check gourd.
2, shall not use the limiter for parking, can not adjust the brakes in the lift, maintenance inspections.
3, when the weight is close to or reaches the rated load, should be a small height of the short distance of the test crane and then lift the minimum height, lifting operation should not be passed from someone above, so as to avoid the occurrence of accidents.
4, no decrease in electric hoist limiter, the hook and the lowest working position, the wire ropes must retain the safety ring 3 circle above.
5, shall not be carried out on the electric hoist modification.
6, if the use of abnormal noise or fault, should stop checking, troubleshooting and then work.
Ring chain electric hoist to remind you: as the operator, remember that the code is our mission, in case of flexible processing is our professional quality tests, so in any link must be vigilant, do not be lazy.

The article by the original electric hoist site such as reprint please indicate the source. www.jcyccrane.com